Perfect Adapter™ Optic Mounts for Savage O/U 24 Shotguns by Gun-Guides®
SKU SAV-24-ADAPTER
$31.95
In stock
1
Product Details
NEW LOW PRICE!
Optic Mounts for Savage Model 24 Series Shotguns.
Includes one set of two mounts as shown above.
NEW LOW PROFILE DESIGN: Adjust as needed - Use one or both!
NEW LOW PROFILE DESIGN: Adjust as needed - Use one or both!
Finally, there's an alternative to the original Savage 24 Series open sights.
Fits ALL .22 LR & 22 WMR over .410, 20 GA. and 12 GA.
Made from lightweight aircraft aluminum.
Matt/Satin black finish.
Matt/Satin black finish.
Mounts securely into the two factory grooves cut into the upper rimfire barrel found on Savage O/U 24 C,D,F,&G models.
Will not fit Model 24's that have a centerfire upper barrels (30-30, 223, ect.)
RINGS and OPTICS as shown above are NOT included.
INCLUDES:
- Standard Weaver slot
- 2 Mounting Bolts per Mount
- Wrench
Mounts are about 1.5" inches in length.
UPC: 045635885646
FAQ: Can I adjust the mounts to a custom fit?
YES: Here's a few suggestions.
Over the many years of production on this rimfire rifle / shotgun , there has been a few tolerance changes in the groove channels.
However, theres a simple solution to custom fit our adapters to your rifle.
The goal here is to allow the two screws to do the final clamping action on the mounts to secure the mount to the groove channels.
Step 1: Remove both screws on each adapter.
TOO TIGHT?
IF TOO snug / tight where they will not easily slide with just a slight bit tension. We will need to spread the gap on the underside of the mount. Place each mount on a hard surface and insert a flat head screw driver or small pry bar as shown here.
GENTLY tap with a small hammer to spread the gap the slightest amount necessary and test fit on the rifle... Repeat if needed.
Replace the screws and tighten to around 15 or less INCH POUND. (finger snug by inserting the long end of the wrench to avoid extra leverage).
TOO LOOSE?
IF TOO WIDE/ LARGE where they will slide on to the rail and not tighten down securely. We will need to lower gap distance on the underside of the mount. Place each mount on a hard surface as shown below. Use a small plastic hammer or use a small non-marring piece of wood and slightest amount necessary GENTLY tap downward to tighten the clamp (as shown with the white arrow below) .Test fit on the rifle... Repeat if needed. Replace the screws and tighten to around 15 or less INCH POUND. (finger snug by inserting the long end of the wrench to avoid extra leverage).
STEP 3: If necessary, rest assured that you can return the adapters to us for a full 100% refund (less return shipping expense).
FAQ: What rings are on the scope images?
We have used each of these with great success:
Weaver Grand Slam Weaver-Style Rings Lever Lock Rings
Warne Maxima Quick-Detachable Weaver-Style Rings
Leupold QRW Quick-Release Weaver-Style Rings
Save this product for later
Display prices in:
USD
