Perfect Adapter™ Optic Mounts for Henry Lever Action Rimfire Rifles by Gun-Guides®.
02-HEN
$31.95
Out of stock
1
Product Details
NEW LOW PRICE!
Optic Mounts for Henry Rimfire Lever Action Series Rifles.
NEW LOW PROFILE DESIGN: Adjust as needed - Use one or both!
NEW LOW PROFILE DESIGN: Adjust as needed - Use one or both!
Finally, there's an alternative to the original iron sights.
Perfect for young and older eyes!
Perfect for young and older eyes!
Fits ALL .22 LR, 22 WMR, 17 HMR models with the standard groove in the top of the receiver.
Sorry, we do not offer mounts for Henry Centerfire Rifles.
Made from lightweight aircraft aluminum.
Sorry, we do not offer mounts for Henry Centerfire Rifles.
Made from lightweight aircraft aluminum.
Matt/Satin black finish.
RINGS and OPTICS as shown above are NOT included.
INCLUDES:
- Standard Weaver slot
- 2 Mounting Bolts per Mount
- Wrench
Mounts are about 1.5" inches in length.
UPC: 689727599808
FAQ: Can I adjust the mounts to a custom fit?
YES: Here's a few suggestions.
Over the many years of production on this rimfire rifle / shotgun , there has been a few tolerance changes in the groove channels.
However, theres a simple solution to custom fit our adapters to your rifle.
The goal here is to allow the two screws to do the final clamping action on the mounts to secure the mount to the groove channels.
Step 1: Remove both screws on each adapter.
TOO TIGHT?
IF TOO snug / tight where they will not easily slide with just a slight bit tension. We will need to spread the gap on the underside of the mount. Place each mount on a hard surface and insert a flat head screw driver or small pry bar as shown here.
GENTLY tap with a small hammer to spread the gap the slightest amount necessary and test fit on the rifle... Repeat if needed.
Replace the screws and tighten to around 15 or less INCH POUND. (finger snug by inserting the long end of the wrench to avoid extra leverage).
TOO LOOSE?
IF TOO WIDE/ LARGE where they will slide on to the rail and not tighten down securely. We will need to lower gap distance on the underside of the mount. Place each mount on a hard surface as shown below. Use a small plastic hammer or use a small non-marring piece of wood and slightest amount necessary GENTLY tap downward to tighten the clamp (as shown with the white arrow below) .Test fit on the rifle... Repeat if needed. Replace the screws and tighten to around 15 or less INCH POUND. (finger snug by inserting the long end of the wrench to avoid extra leverage).
STEP 3: If necessary, rest assured that you can return the adapters to us for a full 100% refund (less return shipping expense).
FAQ: What rings are on the scope images?
We have used each of these with great success:
Weaver Grand Slam Weaver-Style Rings Lever Lock Rings
Warne Maxima Quick-Detachable Weaver-Style Rings
Leupold QRW Quick-Release Weaver-Style Rings
Save this product for later
Display prices in:
USD
